Our range of partition products are designed to save you time on site while maintaining clean, professional and long lasting finishes.
Edge banded shadowline strips
Used in conjunction with stopends to create a finish for the tops of partitions or around door jams.
By edge banding these strips (as opposed to painting) you’ll have a cleaner finish with no marking or scratching and excess plaster can be easily removed.
Straight stopends
We fabricate straight MDF stopends to order.
Straight stopends are used for door and window openings, ends of partitions, half height walls etc.
Available in thicknesses: 16, 18, 25, 32mm. Any radius, any width, any angle.
Curved Stopends
We fabricate curved MDF stopends to order.
Curved stopends (used in conjunction with straight) create curved walls, bulkheads & architectural details. CNC machined to plans as required.
Available in thicknesses: 16, 18, 25, 32mm. Any radius, any width, any angle.
Plywood Noggins
Providing strength for steel stud walls, plywood noggins have a 5mm groove on one side to sit behind the lip of the stud allowing it to finish flush with the frame.
Commonly used in hospitals and bathrooms, they provide fixings for handrails, dryers, tvs etc.
Butt joint boards
Butt joint boards pull in the ends of the board to allow room for paper tape and setting. You’ll end up with smoother, flatter butt joints and reduce your plaster, sanding and labour by nearly half.
Full length so they will back block the joint compared to fiddling with small stitching battens. Ample room to screw because of the large size. Find out more here.
Wall Nibs
A U shaped, pre-fabricated plasterboard section eliminating the need to set external angles or stopends, they allow skirting and trim to fit snug around the nib as there isn’t a build up from setting. Wall Nibs are pre-finished and have a timber insert for fixing door and glass sections.
Applications include creating door and window openings; starting partitions against glass; nibs and half-height walls; temporary barrier walls (eg. lift lobbies). Find out more here.
32mm MDF Door blanks are also available cut to size, along with viewing panels and air grills.
